SHARP AY-XM12CR
Manual de Servicio

AY-XM7/9/12CR AY-XPM7/9/12CR AE-XM18/24CR

21. Disconnect the 6 terminals(IN+,IN-,L+,L-,OUT+, OUT-) and 1 connector (CN13) on the active filter. And unscrew the 2 screws fixing the active filter and remove it. Note : When the active filter re-install, silicone grease must be paste to the back face of the active filter.

22. Unscrew the 4 screws fixing the heat sink Note : Seal the 4 burring holes with silicone sealer before re-installing.

23. Disconnect the 5 terminals(P(+),N(-),U,V,W) and 2 connectors (CN5A,CN14) on the power transistor module (IPM). And unscrew the 4 screws fixing the power module and remove it. Note : When the power module re-install, silicone grease must be paste to the back face of the power module.

70