HITACHI AXM70MP3
Manual de Usuario

Listening to Radio Broadcasts
You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage. C a u t i o n : Before listening to the radio, please check that both the FM and AM antennas are correctly connected.

Tuning in a Station
1. Repeatedly press the function button (FUNCTION) on the unit or direct press the AM/FM switch button (AM/FM) on the remote control to select tuner function. 2. Press the AM/FM switch button (AM/FM) to select the band. 3. Select a station using one of the following methods. w Manual Tuning Tuning Press the tuning backward button (TUNING-) or tuning forward button (TUNING+) repeatedly to move from frequency to frequency until you find the station you want. w Auto Tuning Tuning If you press and hold the tuning backward button (TUNING-), tuning forward button (TUNING+) for one second or more, the frequency changes down, or up, automatically until a station is found. w Preset Tuning (P ossible only after presetting stations) Tuning (Possible Press the presetting stations button (PRESET) on the unit or press the channel select backward button (CH-), channel select forward button (CH+) on the remote control to select the desired preset number. Its band and frequency are displayed on the VFD.

Presetting Stations
You can preset up to 16 FM stations and up to 16 AM stations. 1. Tuning in the desired station. 2. Press the memory button (MEM), the �MEM� will flash on the VFD. 3. Press the presetting stations button (PRESET) on the unit or press the channel select backward button (CH-) or channel select forward button (CH+) on the remote control to select the preset number, the �MEM� will flash on the VFD. PRESET Increases cyclically the preset number CHDecreases the preset number by 1 CH+ Increases the preset number by 1 4. Press the memory button (MEM) to store the station. After 1 second, the VFD returns to the broadcast frequency display. 5. Repeat above steps 1 to 4 for each station you want to store in memory with a preset number.

To change the FM Reception Mode
When you are tuned into an FM stereo broadcast, the �FM ST.� will display on the VFD and you can hear stereo effects. If an FM stereo broadcast is hard to receive or noisy, you can select monaural mode. Reception improves, but you lose any stereo effect. Press the stereo/MONO select button (STEREO) on the unit or stereo/MONO select button (ST./MO.) on the remote control so that the �FM ST.� goes off on the VFD. To restore the stereo effect, press the stereo/MONO select button (STEREO) on the unit or stereo/MONO select button (ST./MO.) on the remote control so that the �FM ST.� will display on the VFD. - 10 -