SERVICE HINTS
REPAIR POSITION COPPERSIDE REPAIR POSITION COMPONENTSIDE
To get access to the copperside of the printed board assembly proceed as follows: 1. Remove the bottom screws (4x) 2. Remove the cabinet screws (4x) 3. Lift the bottom (take care of cabinet/bottom snaps) 4. Supply the unit via external DC-socket
To get access to the componentside of the printed board assembly proceed as follows: 1. Remove the bottom screws (4x) 2. Remove the cabinet screws (4x) 3. Lift the bottom (take care of cabinet/bottom snaps) 4. Lift the printed boards and flip the main board 5. Supply the unit via external DC-socket 6. Short-circuit door-switch 1409 during measurements
POSITIONING OF SPRING-OPEN
POSITIONING OF SPRING-CD-DOOR
ROUTING OF CD-DRIVE WIRES
Remark: The spring for the CD-door is positioned loose in the cabinet assembly as shown in the picture above. It will be caught in its defined position just after mounting cabinet and bottom parts together.
