KORG AX1000G
Manual de Usuario

2. Playing the AX1000G
Using the expression pedal as you play 1. In Play mode, select a program that uses the expression pedal. 2. Make sure that the pedal LED is lit. If it is not lit, press the expression pedal firmly once to make the pedal LED light (the pedal will be turned on). 3. Operate the expression pedal while playing your guitar. As you raise and lower the pedal, the output sound will change correspondingly.
If Volume is selected in the PEDAL effect block, it will not be possible to turn the expression pedal on/off. It will remain on (the pedal LED will be lit). The on/off status of the expression pedal is not memorized by each program. Do not apply excessive force to the expression pedal. Before operating the expression pedal, verify the amount of force that is required to make the pedal LED light and to apply the effect.

Individual mode
In this mode you can press the program switches or the pedal switch to turn each individual effect block on/off while you play. As in Play mode, you can edit the settings, use the metronome, and write a program.
In this mode it is not possible to switch programs or to select bypass or mute.

Entering Individual mode
In Play mode press and hold the Bank switch for one second, and you will enter Individual mode. The name display will indicate �-INDIV-,� and the bank number display will indicate � .� When you enter Individual mode, the program LED�s will indicate the on/off status of each effect block (synchronized with the effect block LED�s). DRIVE-AMP corresponds to program switch (LED) 1, CABINET to 2, MODULATION to 3, AMBIENCE to 4, and PEDAL to the expression pedal (pedal LED). Each time you press a program switch, it will cycle on or off. For the pedal effect, pressing the expression pedal firmly will turn it on/off (the switch is located under the pedal). However for some pedal effects such as SAMPLE & PLAY, the expression pedal is used in a special way, and cannot be turned off once the pedal has been turned on.
For some effects, it is not possible to simultaneously use the MODULATION and PEDAL effect blocks, or the PEDAL and AMBIENCE effect blocks. If you attempt to simultaneously turn on both of these effect blocks in such a combination, the effect block that was turned on first will automatically be turned off.

Indication of currently used effect blocks

Exiting Individual mode
To return to Play mode, press either the bank switch or the EXIT switch.

10