DETERGENT AND ADDITIVES
FILLING THE DETERGENT AND ADDITIVES
1. Pull out the detergent drawer. The drawer will have three or four chambers depending on the model. 2. Filling the detergent � � Programmes with pre- and main wash. Main wash programme without prewash. When using liquid detergent, extract the coloured insert from the drawer and put it in the compartment . The insert has a scale to make dosing easier. � Add fabric softeners and conditioners (no further than the �Max� mark (three chamber models) or the �100 ml� mark (four chamber models). Fill chlorine bleach only to the �Max� mark (if model is suited to its use). Stain remover Water softener (water hardness class 4) Starching Dissolve/dilute the starch, powder or liquid, in approximately 1 litre of water in a container. Load the machine, close the door, select �Rinse and Spin� and start. Once the machine has started filling, pour the dissolved starch into detergent dispenser chamber . Flush the chamber straight away by adding about half a liter of water. Detergent drawer with 3 chambers Notes: � When using highly concentrated detergents, use the detergent ball provided with the detergent and place it directly in the drum to avoid dispensing problems (for programmes without pre-wash only). � Dose the correct amount of concentrated fabric softener and dilute with water up to the maximum level marked in the softener compartment.
�
� � �
Detergent drawer with 4 chambers
3. Slide the drawer in until it clicks shut.
DYEING AND BLEACHING
Dyeing: commercially available products usually consist of a dye colour, fixing agent and salt. Pour the dye colour, fixing agent and salt directly into the empty drum, and only then load the laundry. � � � Only use products designed for use in washing machines. Follow the manufacturer�s instructions. Plastic and rubber components of the machine can be stained by dyes or bleaches.
