Installation
� Attaching the wire
[Convertible camera AW-E350/E650/E655/E750/E860]
The camera comes with a wire for preventing the camera from dropping. Follow the instructions below to use it to couple the camera to the pan-tilt head. When mounting the cameras with fan (AW-E655, AW-E750, AW-E860) � Use the wire mounting screw (M4�8 mm with flat washer and spring washer) to attach one end of the wire to the pan-tilt head�s arm. � Mount the mounting spacer on the top panel of the camera. (The mounting spacer is provided with the camera as an accessory.) � Use the wire mounting screw (M4�8 mm with flat washer and spring washer) to attach the other end of the wire to the screw hole of the mounting spacer. When mounting the cameras without fan (AW-E350, AW-E650) � Use the wire mounting screw (M4�8 mm with flat washer and spring washer) to attach one end of the wire to the pan-tilt head�s arm. � Use the wire mounting screw (M4�8 mm with flat washer and spring washer) to attach the other end of the wire to the screw hole of the top panel of the camera.
For a stand-alone installation
� Camera: AW-E750
Arm M4�8 mm wire mounting screw with flat washer and spring washer Wire
For installation on the ceiling
� Camera: AW-E750
M4�8 mm wire mounting screw with flat washer and spring washer M4�8 mm wire mounting screw with flat washer and spring washer
Mounting spacer (supplied with AW-E750)
M4�8 mm wire mounting screw with flat washer and spring washer
Mounting spacer (supplied with AW-E750)
� Camera: AW-E350, AW-E650
� Camera: AW-E350, AW-E650
� Be absolutely sure to tighten up the mounting spacer and screws securely using a tool such as a screwdriver.
