Limiters
$ Setting/releasing the limiters
O For the controller AW-RP301/AW-RP305/AW-RP501/AW-RP505 1. To set the upper limit position of the travel range: Using the controller, tilt the camera to the position which is to serve as the upper limit. While holding down the MEMORY button on the controller, press PRESET button 2 and PRESET button 3 simultaneously for at least 5 seconds. The setting is completed as soon as the lamp of the PRESET button 5 comes on. To release the setting: While holding down the MEMORY button on the controller, press PRESET button 2 and PRESET button 3 simultaneously for at least 5 seconds. The setting is released when the lamp of the PRESET button 10 comes on. 2. To set the lower limit position of the travel range: Using the controller, tilt the camera to the position which is to serve as the lower limit. While holding down the MEMORY button on the controller, press PRESET button 7 and PRESET button 8 simultaneously for at least 5 seconds. The setting is completed as soon as the lamp of the PRESET button 5 comes on. To release the setting: While holding down the MEMORY button on the controller, press PRESET button 7 and PRESET button 8 simultaneously for at least 5 seconds. The setting is released when the lamp of the PRESET button 10 comes on. 3. To set the left-most limit position of the travel range: Using the controller, tilt the camera to the position which is to serve as the leftmost limit. While holding down the MEMORY button on the controller, press PRESET button 1 and PRESET button 6 simultaneously for at least 5 seconds. The setting is completed as soon as the lamp of the PRESET button 5 comes on. To release the setting: While holding down the MEMORY button on the controller, press PRESET button 1 and PRESET button 6 simultaneously for at least 5 seconds. The setting is released when the lamp of the PRESET button 10 comes on. 4. To set the right-most limit position of the travel range: Using the controller, tilt the camera to the position which is to serve as the right-most limit. While holding down the MEMORY button on the controller, press PRESET button 4 and PRESET button 9 simultaneously for at least 5 seconds. The setting is completed as soon as the lamp of the PRESET button 5 comes on. To release the setting: While holding down the MEMORY button on the controller, press PRESET button 4 and PRESET button 9 simultaneously for at least 5 seconds. The setting is released when the lamp of the PRESET button 10 comes on.
