|
No hay comentarios de productos.
3gb05425.fm Page 102 Thursday, October 31, 2002 11:56 AM
Pouring in the detergents and additives
The dispenser will have three (models �B1� or �B2�) or four (model �A�) chambers depending on model. Chamber � Detergent for the prewash Chamber � Detergent for the main wash � Stain remover � Water softener (water hardness 4) When using liquid detergent, remove the coloured insert from the detergent container and insert it in the first gap in chamber . The scale on the insert makes dosing easier. Chamber � Fabric Softener � Liquid starch Only pour additives in up to the �Max� mark. Chamber � Chlorine bleach No more than to the �Max� mark (four chambers model �A�)
A
B1
B2 B2
Notes:
� Keep detergents and additives in a safe, dry place out of the reach of children. � Liquid detergents can be used for programmes with prewash. In this case only measure in a powder detergent for the main wash. � To prevent dispensing problems when using highly concentrated powder and liquid detergents, use the special detergent ball or bag supplied with the detergent and place it directly inside the drum. � When using descaling agents, bleaches or dyes, make sure that they are suitable for washing machines. Descalers could contain components that can attack parts of your washing machine. � Do not use any solvents in the washing machine (e. g. turpentine, benzine). � If you use starch powder, proceed as follows: 1. Wash your laundry using the desired wash programme. 2. Then stir the starch in with water in a beaker. 3. Select the �Rinse and Spin� programme, reduce the speed to 800 rpm and start the programme. 4. Pull out the detergent drawer until you can see about 3 cm. of chamber 5. Pour the starch solution into chamber .
while the water is running into the detergent drawer.
6. If there are starch residues in the detergent drawer when the programme has finished, clean it if necessary (see �Cleaning and Maintenance�). Take note also of the starch manufacturer's information. 102
|
