WHIRLPOOL AWM 6063
Manual de Usuario

Home

Appliances

WASHING PROGRAMME
Selecting the programme:
1.Plug in the appliance. 2.Turn on the water supply tap. 3.Set the Programme Selector knob to the desired programme. 4.Select additional options, if desired, pressing the corresponding button.The indicator lights up. By a further pressing of the button this option can be turned off again. 5.Press the �Start/Pause� button. The indicator light will come on and the programme duration is shown on the display (if available). The indicator lamps show the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Wash, Rinse, Spin. When the sequence of the programme is finished the corresponding lamp goes out.

Options (depending on model)
Easy Ironing Energy save/ Eco Prewash Quick wash / Rapid � Can be used together with Cotton and Synthetics programmes to make ironing easier. � Increases the water quantity and the clothes are spun very gently. � Increases the programme time and reduces the temperature. This reduces energy consumption by about 30% without compromising the excellent results of the wash. � Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle time increases approximately 15 min. � Select for quick, economical washes. � Especially suitable for small, lightly soiled loads. Note: If �Quick wash� is selected, only the �Rinse Hold� and �Spin speed reduction� options can be activated. � More water and a longer time in rinse cycle is added. � The intensive rinse function is especially suitable for areas with particularly soft water, for baby clothes and to help people with allergies. � The laundry remains in the last rinse water without being spun, to avoid heavy creasing. � Especially suitable for the �Synthetics� or �Delicates� programmes, if the laundry is not to be unloaded immediately after the end of the programme. This function is particularly useful if you want to postpone spinning to a later time or when you do not wish to spin the clothes. Note: The programme stops to �Rinse Hold� at the time the �Rinse Hold� light in the programme flow indication is on. Continuing wash cycle after rinse hold: � Press the Rinse hold button again; the load will be spun according to the selected programme. � If you do not wish to spin the clothes, turn the programme selector knob to the drain programme and press the �Start/Pause� button � Press this button to reduce the predetermined automatic maximum spin speed. In some programmes the maximum final spin speed is limited to go easy on your laundry items. Selection of a higher spin speed is not possible. � With the �Cotton� and �Synthetics� programmes a short spin cycle is provided in any case, even if the exclusion has been selected, in order to optimize rinsing results. � If the spin speed �0� is selected, the final spinning is cancelled. The water is drained out only.

Intensive Rinse Rinse hold / Spin delay

Spin speed reduction

25