Inicio >>
PIONEER >>
AVX-P7800WES Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
AVX-P7700W
- Removing the Mother PCB
1. Remove the screw M to take off the holder. 2. Remove the screw N. 3. Unsolder the tuner PCB the catches. 4. Straighten the nine catches marked with arrow to remove the mother PCB.
M
Holder
Mother PCB
Solder
N
- Precaution in assembling the drive mechanism
1. Insert the drive mechanism in the right and left rail units equally to the both side. If inserted unequally, the drive mechanism will not operate normally. 2. The screw marked with arrow is for preventing the drive mechanism from dropping. Be sure to fasten the screw to prevent danger in case of car crash. Drop prevention screw OK Drive Mechanism NG
