|
No hay comentarios de productos.
Section
Other Functions
05
(VIDEO 2/BACK CAMERA INPUT jack) when a rear view camera is installed on your vehicle. When the gear shift is in REVERSE (R) position, the video automatically switches to a rear view camera video. (For more details, consult your dealer.) ! Confirm the setting immediately whether the display changes to a rear view camera video when the gear shift is moved to REVERSE (R) from another position. ! When the display changes to a rear view camera video during normal drivings, switch to another setting. ! To return to the source display, press V.ADJ. 1 Use a, b, c, d and A.MENU to select AV INPUT2. 2 3 Press c or d to select B. CAMERA. Press b to select POLARITY.
# To turn warning tone off, press b.
2
Press a to turn warning tone on.
Setting the automatic open function
To prevent the display from hitting the shift lever of an automatic vehicle when it is in P (park) position, or when you do not wish the display to open/close automatically, you can set the automatic open function in the manual mode. Furthermore, to adjust the LCD panel slide position, you can turn the set back on or off. 1 Use a, b, c, d and A.MENU to select FLAP SET. 2 Press a and the LCD panel slides to the back.
# Press b and the LCD panel slides to the front.
4 Press c or d to select an appropriate setting for polarity. Each press of c or d switches between the following polarity:
! BATTERY When the polarity of the connected lead is positive while the gear shift is in REVERSE (R) position ! GND When the polarity of the connected lead is negative while the gear shift is in REVERSE (R) position
3 Press c or d to select the display to open/close automatically or manually. Press c to select MANUAL, and you have to press OPEN/CLOSE to open/close the display. Press d to select AUTO, and the display automatically opens/closes when power to this unit is turned on.
English
Setting the clock Switching the warning tone
If the front panel is not detached from this unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone. 1 Use a, b, c, d and A.MENU to select DT. WARNING. Use these instructions to set the clock. 1 Use a, b, c, d and A.MENU to select CLOCK ADJ. 2 Press c or d to select OFF and then press A.MENU to turn the clock display on. ON will appear in the display instead of OFF. Clock display is now on.
En
13
|
