PIONEER AVH-P7650DVD/RD
Manual de Usuario

Section

Tuner

05

Listening to the radio
1 2 3 4

7 LOC indicator Shows when local seek tuning is on. 1 Touch the source icon and then touch TUNER to select the tuner.
# When the source icon is not displayed, you can display it by touching the screen.

2 Touch the screen to display the touch panel keys.

76

5

3 Touch BAND to select a band. Touch BAND repeatedly until the desired band is displayed, FM1, FM2, FM3 for FM or AM. 4 To perform manual tuning, briefly touch c or d. The frequencies move up or down step by step.

These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page.
Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 83).

# You can also perform manual tuning by moving the joystick left or right.

1 Source icon Shows which source has been selected. 2 Band indicator Shows which band the radio is tuned to, AM or FM. 3 Preset number indicator Shows which preset has been selected. 4 Frequency indicator Shows to which frequency the tuner is tuned. 5 Preset list display Shows the preset list. 6 Stereo (5) indicator Shows that the frequency selected is being broadcast in stereo.

5 To perform seek tuning, keep touching c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by briefly touching either c or d. # If you keep touching c or d you can skip stations. Seek tuning starts as soon as you release the key. # You can also perform seek tuning by holding the joystick left or right. Note If you do not use the touch panel keys within 30 seconds, they will be hidden automatically.

Tuner
25

En