Installing the DVD Player (DIN Rear-mount)
Installation using the screw holes on the side of the unit
1. Remove the frame.
Frame
Pull out to remove the frame. (When reattaching the frame, point the side with a groove downwards and attach it.)
Installation
2. Fastening the unit to the factory radio mounting bracket.
Select a position where the screw holes of the bracket and the screw holes of this product become aligned (are fitted), and tighten the screws at 2 places on each side. Use any of binding screws (4 � 3 mm), binding screws (5 � 6 mm) or flush surface screws (5 � 6 mm), depending on the shape of the screw holes in the bracket.
*1 Use binding screws (4 � 3 mm) only.
