SONY AVDC700ES
Manual de Servicio

AVD-C700ES SECTION 4 TEST MODE
[Transfer Mode] 1. Press the [POWER] button to turn the set on. 2. Press the buttons of x and [DISC4] simulaneously for five
3. 4. seconds. The message �MECHA LOCK� displayed. To exit from this mode, press the [POWER] button to turn the set off. 9. Press the > button and the message �1H2L3-4-5� is displayed and DISC1 LED turn on, DISC2 LED turn on dark and DISC 3 to 5 LEDs turn off. Press the > button and the message �1-2H3L4-5-� is displayed and DISC1 LED turn on dark, DISC2 LED turn on and DISC3 LED turn on dark, DISC4 or 5 LEDs turn off. Press the > button and the message �1-2-3H4L5-� is displayed and DISC1 or 2 LEDs turn on dark, DISC3 LED turn on and DISC4 LED turn on dark, DISC5 LED turn off. Press the > button and the message �1-2-3-4H5L� is displayed and DISC1 to 3 LEDs turn off, DISC4 LED turn on and DISC5 LED turn on dark. Press the > button and the message �LED OFF� is displayed and all LEDs turn off. Press the > button. All segments turn on and all LEDs turn on just the same as 3. By pressing the . button and the message �AVD-C700ES� is displayed. Press the . button and the message �Dest <000>� is displayed. Press the . button and the message �STRµ #,##� is displayed. Press the . button and the message �DVDµ #,##� is displayed. To exit from this mode, press the [POWER] button to turn the set off.

10.

11.

[Jog Volume Mode]
* Master Volume Check. Procedure: 1. Press the [POWER] button to turn the set on. 2. To enter the test mode, press the three buttons X , [A.F.D] and Z simultaneously. 3. The message �JOG 0� is displayed. 4. �JOG 0� value increases like +1, +2, +3 ... if rotating the [VOLUME] knob clockwise, or it decreases like -1, -2, -3, ... if rotating counter-clockwise. 5. To exit from this mode, press the [POWER] button to turn the set off. 12.

13. 14. 15. 16. 17.

[Key Check Mode]
* Keyboard check. Procedure: 1. Press the [POWER] button to turn the set on. 2. 3. To enter the test mode, press three buttons X , [PRESET �] and Z simultaneously. In the key check mode, the fluorecent indicator displays �KEYNUM 0�. Each time a button (without the [POWER] button) is pressed, �KEYNUM 0� value increases. However, once a button is pressed, it is no longer taken into account. To exit from this mode, press the [POWER] button to turn the set off. 18. 19.

[Disc Tray Lock]
The disc tray lock function for the antitheft of an demonstration disc in the store is equipped. Setting Procedure: 1. Press the [POWER] button to turn the set on. 2. Press two buttons of x and Z simultaneously for five seconds. 3. The message �LOCKED� is displayed and the tray is locked. Releasing Procedure: 1. Press two buttons of x and Z simultaneously for five seconds again. 2. The message �UNLOCKED� is displayed and the tray is unlocked.
Note: When �LOCKED� is displayed, the tray lock is not released by turning power on/off with the [POWER] button.

4.

[Display Test Mode and Version Display Mode]
* Fluorescent segments and LEDs are tested when this test is activated. Procedure: 1. 2. 3. Press the [POWER] button to turn the set on. To enter the test mode, press the three buttons X , [DISPLAY] and Z simultaneously. All segments turn on and all LEDs turn on. ( MULTI CHANNEL DECODING LED (blue), [DISC 1 to 5] LEDs (blue)) Press the > button and confirm the display and all LEDs turn on. Press the > button and confirm the display and all LEDs turn off. Press the > button and confirm all segments and all LEDs turn off. Press the > button and the message �MCD_LED ON� is displayed and �MULTI CHANNEL DECODING� LED turn on. Press the > button and the message �1L2L3L4L5L� is displayed and DISC 1 to 5 LED turn on dark.

[SHIPMENT Mode]
* The All Clear clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning the set to the customer. Procedure: 1. Press the [POWER] button to turn the set on. 2. To enter the test mode, press the three buttons [MODE], [PRESET+] and Z simultaneously. 3. The LCD displays the message �SHIP MODE�. 4. Press the G button. 5. The LCD displays the message �FINISHED!� and the set is reset. 6. To exit from this mode, press the [POWER] button to turn the set off.

4. 5. 6. 7.

8.

20