NOTES: Remember, the Plug In Menu will only appear after you turn on the TV for the �rst time, or after a power interruption.
The Clock is the heart of all timer functions. You must set the clock before the On/Off Timer will work. To SET CLOCK To operate
TIME ��: �� � � START CLOCK
TIME � �:� � � � START CLOCK
If you choose NO, you will receive the following message:
YOU CANNOT OPERATE ON/OFF TIMER !
To set the hour (AM/PM) To move to minutes To set the minutes To move to START CLOCK when done with settings To start the clock
THANK YOU ! ! If you want to synchronize the TV clock with another clock or time signal, press LEFT or RIGHT MENU arrow at the appropriate time, and the clock will start.
Note: If you attempt to �Start Clock� without setting the time you will receive this message:
INCORRECT TIME PLEASE TRY AGAIN
Once you have set up the items in the Plug In Menu you must select Finish. Finish tells the TV that you have selected your personal default options for the menu and clock, and unless there is a power interruption, the Plug In Menu will not show up again. To FINISH To exit and save settings
Note: You can reset the options available in Plug In Menu via the regular JVC menu system: � Language is found in the Initial Setup Menu. � Auto Tuner Setup is found in the Initial Setup Menu. � Tuner Mode is found in the Initial Setup Menu. � Set Clock is found in the Clock/Timers Menu.
Note: If the TV is unplugged or you experience a power outage, you must reset the clock for any timer functions to work. CLOCK SET MESSAGES: If you do not set the clock but attempt to use the On/Off Timer anyway, you will get the following message:
POWER INTERRUPTED WOULD YOU SET CLOCK FIRST ? YES NO
