Initial installation
Remote control
Batteries To insert or change the batteries, press the point marked by an embossed arrow. Push the cover of the battery compartment down and remove it. Insert the batteries of the alkaline manganese type LR 03 (AAA) with the correct polarity (+/�).
Connection
Mains Connect the TV set to a 230V/50�60 Hertz outlet. Antennas Connect your antenna or cable system to the antenna socket of the PIP tuner. Plug the antenna plug protruding from above the PIP tuner into the antenna socket of the VHF/UHF tuner.
Initial installation
Automatic programming of the TV set is started the first time you switch it on. Follow the menus. First you have to select the menu language for your set. Then you specify which antenna you have connected to your TV and in what country you are using it. Then you start the station search. The TV set searches for, stores and sorts all the stations which your antenna system receives. You then see a list of the stored stations in which you can mark your favorites. Finally log in your video recorders, decoders, Loewe audio system and Home Automation with the connection wizard and connect these to the TV set according to the illustrated connection plan.
OK
+
If your TV set is equipped with a DVB-T module, connect your antenna or cable systems to the top socket of the DVB-T module (IN) and connect the bottom socket (OUT) to the antenna input of the PIP tuner. If equipped with
+
+
one or two satellite tuners, connect the SAT antennae to the SAT sockets (see figure on page 5).
DIG IN RC5/RC6
Select the settings with the arrows on the ring... ....confirm the settings with OK.
Then push the cover back on. If you are inserting batteries in the remote control for the first time or changing the batteries you will see the language selection for the remote control in the display. Select German or English with the rocker. Press the SET button to confirm your selection. The display shows the �TV� menu, the remote control is set for operating the TV. Note on disposal of batteries: The original batteries do not contain any pollutants such as cadmium, lead and mercury. Used batteries do not belong in the domestic waste. They must be taken to the appropriate collection points according to the national laws. Ask your dealer.
SAT IR
CTRL VGA
1 SERVICE 2
SAT A/D
AUDIO IN
AUDIO VHF/UHF
R OUT L
DIG OUT AV2/RGB AV3
AV1
OK
SUR R
C SUBWOOFER STAND SUB
You then move on to the next menu...
L
Switching on
The display and the On/Off switch are combined in one unit. Press the On/Off button so that it is pressed in.
...press this button if you want information about the settings. You can repeat initial installation at any time, e.g. after moving house. Call the index in the main information (i button). Then select the item �Repeat initial installation�. Then start �Initial installation� with OK.
