CAMPAQ ARMANDA 1700
Manual de Servicio

Optical Disc Bay
A CD-ROM or DVD-ROM drive can be installed in the optical disc bay. To remove a CD-ROM drive or DVD-ROM drive, complete the following steps: 1. Prepare the computer for disassembly (Page 5-3). 2. Remove the keyboard (Page 5-14). Note: For clarity, the keyboard is shown removed from the computer. The keyboard may be left attached to the system unit for this procedure. 3. Place the tabs on the keyboard in the slots provided in the top cover. 4. Remove the two retaining 1 screws. 5. Reach into the access opening 2 with a finger and push the drive toward the front of the computer. 6. Remove the optical disc bay drive.

Figure 5-20. Removing the Optical Bay Drive

To install a CD-ROM drive or DVD-ROM drive, reverse the procedure.

5-22 Removal and Replacement Procedures