2) Cut out the portion of the power supply cover shown in the illustration.
2) Remove the fixing material from the packaged part, and remove the packaged part.
Cut-out portion
Power supply cover
3) Hang the two pawls of the power supply cover on the rear cabinet and attach the cover with the screw.
Screw
D. Remove the paper feed base screw of the large capacity tray.
1) Slowly pull out the paper feed base tray until it stops.
Pawls
Power supply cover
4) Connect the relay harness connector of the large c capacity paper feed tray to the connector of the option desk, and tighten the screw attached to the connector to fix the connector.
Connector
2) Remove the paper feed base fixing screw (1 pc.) of the large capacity tray.
Screw
C. Fixing material and packaged part removal
1) Remove the fixing material from the large capacity paper feed tray.
3) Push the large capacity tray slowly into the original position.
