|
|
|
Usuarios conectados
Actualmente hay 5892 visitantes y
1 usuarios online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
3. Density level adjustment
A. AE level adjustment (OC mode)
[Input procedure]
When the density select key is pressed and held for 5 sec after turning on the [PHOTO] mode lamp, the [AUTO] mode lamp blinks and the current setup of the density level is displayed.
4. Toner save mode setup and cancel
[Input procedure]
When the density select key is pressed and held for 5 sec after turning on the [TEXT] mode lamp, the [PHOTO] mode lamp blinks and the current setup of the density level is displayed.
[Setup/Cancel]
When the density adjustment key [<] is pressed, Level 1 is lighted and the toner save mode is set. When the density adjustment key [>] is pressed, Level 5 is lighted and the toner save mode is canceled.
[Adjustment]
The adjustment is made in 5 steps by pressing the density adjustment key.
[Terminating procedure]
When the density select key is pressed, the mode display is changed from blinking to lighting, and the AE level setup is completed. � In the AE level adjustment mode, all the keys except for the [Density select] key, the [Density adjustment] keys ([>] key and [<] key) are disabled. � In the AE level adjustment mode, the ready lamp and the online lamp are turned off. � The auto mode level adjustment is applied only for the auto mode. � When the machine enters the exposure adjustment mode of OC once, the adjustment mode is not changed though a document is set on the SPF until the setup is completed.
[Terminating procedure]
When the density select key is pressed, the mode display is changed from blinking to lighting, and the setup is completed. � During the toner save mode setup, all the keys except for the [Density select] key, the [Density adjustment] keys ([>] key and [ <] key) are disabled. � During the toner save mode setup, the ready lamp and the online lamp are turned off. � The toner save mode is applied in the auto mode and the manual mode.
B. AE level adjustment (SPF mode)
[Input procedure]
With the SPF mode lamp ON, when the density select key is pressed and held for 5 sec after turning on the [PHOTO] mode lamp, the [AUTO] mode lamp blinks and the current setup of the density level is displayed.
[Adjustment]
The adjustment is made in 5 steps by pressing the density adjustment key.
[Terminating procedure]
When the mode select key is pressed, the mode display is changed from blinking to lighting, and the AE level setup is completed. � During the AE level adjustment mode, all the keys except for the [Density select] key, the [Density adjustment] keys ([>] key and [<] key) are disabled. � During the AE level adjustment mode, the ready lamp and the online lamp are turned off. � The auto mode level adjustment is applied only for the auto mode. � When the machine enters the SPF exposure adjustment mode once, the adjustment mode is not changed though a document is removed from the SPF until the setup is completed. � This function is not available for the OC model.
AR-122E/152E/153E/157E USER PROGRAMS 12 - 2
|
|
|
> |
|
