SHARP AR121E
Manual de Servicio

AL-1000/1010

3. UNPACKING
Unpack the copier and carry it to the installation location by holding the handles on both sides of the copier.

(2) Remove the CAUTION tape from the front cover and remove the two protective pins from the fusing unit by pulling the strings upward one at a time.

CAUTION tape

Protective pins

(3) Push gently on both sides of the front cover to open the cover.

4. REMOVING MATERIALS

PROTECTIVE

PACKING

(1) Remove pieces of tape (a), (b), (c), (d), (e), (f), (g) and (h) and protective cover (i). Then open the original cover and remove protective materials (j) and (k).
c a e f d g h

b

(4) Remove the TD cartridge from the bag. Remove the protective paper. Hold the cartridge on both sides and shake it horizontally four or five times.

(2) Use a coin (or suitable object) to remove the screw. Store the screw in the paper tray because it will be used if the copier has to be moved.

(5) Hold the tab of the protective cover and pull the tab to your side to remove the cover.

5. INSTALLING THE TD CARTRIDGE
(1) Open the side cover while pressing the side cover open button. (6) Gently insert the TD cartridge until it locks in place, while pushing the lock button.

Lock button

5-2