SHARP AM-300DE
Manual de Servicio

AM-300DE
11. Quick setup guide

1
For detailed instructions on setting up and using the AM-300/400, see the online guide on the CD-ROM. To open the guide, double-click the Manual folder on the CD-ROM, double-click English, and then doubleclick Online Manual.pdf. (Note: Acrobat Reader 5.05 or higher is required to view the manual.To install Version 5.05, double-click Acrobat Reader, English, and then ar505enu.exe on the CD-ROM.)

Make sure you have the following items. If any are missing, contact your dealer or retailer.
Note: The shape of the line cord plug varies by country. An adapter (not shown) is provided in some countries. Telephone line Toner cord (AM-400 cartridge only) Drum cartridge

2

Attach the trays.

All company names and product names appearing in this setup guide are the trademarks of their respective owners.

Output tray

Document feeder tray

Setup Guide

CD-ROM

When the tray stops, lift the end slightly and push in.

3

Important: Pull the scanner release toward you to release the scanner lock. Caution: Be sure to release the scanner lock before plugging in the power cord.

4

Plug the power cord into a standard, earthed power outlet. Note: The power outlet must be installed near the equipment and must be easily accessible.

Note: The shape of the power plug varies by country

5

Install the toner cartridge and drum cartridge. 1. Press ı1 . Open the side cover ı2 and then the front cover ı3 . 2. Remove the drum cartridge from its packaging. 3. Insert the drum cartridge, sliding it along the guides. 4. Remove the toner cartridge from its packaging. Shake the cartridge side to side four or five times to distribute the toner evenly within the cartridge.

1

3

2

Caution! Do not touch the fusing unit under the side cover after the machine has been in operation, as it may become very hot.

Grasp this handle to push the cartridge in

5. Insert the toner cartridge, sliding it along the guides until it clicks into place.

6. Close the front cover ı1 and then the side cover ı2 . �

7. Press then press

to select "YES" and

8. Reset the drum cartridge counter: a.Press
A MENU

. (This resets

once and then

Z

or

the toner cartridge counter.)
until "LIFE" appears in the Display:
TONER EXCHANGED?
2

display. b. Press c. Press and then .

Press on the arrow mark to make sure the cartridge clicks into place

1

1:YES, 2:NO

repeatedly to exit.

6

Load paper. 1. Remove the output tray. 2. Insert a stack of paper into the tray, print side up.
The stack should not be higher than this line

3. Squeeze the sides of the paper guide and slide it to the slot for the length of paper loaded.

4. Replace the output tray.

1 � 15