Speaker Connections
Caution: To avoid damaging the speakers with a sudden highlevel signal, be sure to switch the power off before connecting the speakers. Check the impedance of your speakers. Connect speaker with an impedance of 6 ohms or more. The red speaker terminals are + (positive), and the black terminals are _(negative). The + side of the speaker cable is marked to make it distinguishable from the _ side of the cable. Connect this marked side to the red + terminal and the unmarked side to the black terminal. Prepare the speaker cords for connection by stripping off approximately 10 mm or less (no more as this could cause a short-circuit) of the outer insulation. Twist the wires tightly together so that they are not straggly :
3 Make sure it is fastened firm by pulling the cable
How to connect
1 Turn the terminal cap counterclockwise to loosen it.
The speaker terminal caps cannot be fully removed from the base. 2 Insert the wire into the terminal fully and turn the terminal cap clockwise to securely connect it.