PANASONIC AKHC900
Manual de Usuario

Operation Procedure

1 Turn on the power of each equipment. 5 Adjust the black balance. � This adjustment is needed when the 2 Properly adjust the light for the obcamera is used for the first time or afject.

3 Adjust the flange back of the lens, the
iris and the focus. � Flange back must be adjusted when the camera is used for the first time or after replacement of the lens.

ter leaving unused for a long time. � The adjustment is necessary when the ambient temperature is greatly changed or at the change of season. � After adjusting the black balance once, re-adjustment is not needed under the same condition.

4 Adjust the white balance.
� This adjustment is needed when the camera is used for the first time or after leaving unused for a long time. � The adjustment is necessary when the lighting condition or brightness is changed. � After adjusting the white balance once, re-adjustment is not needed under the same condition.

6 Start shooting.

(After shooting, be sure to turn off the power of each equipment connected.)

14