|
|
|
Usuarios conectados
Actualmente hay 5933 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Setup (initial settings)
3
Press the MENU-UP button or MENU-DOWN button to move the cursor to the LOAD position, and press the SET button. The unit is set to the LOAD mode, and the LOAD screen appears on the video monitor. SET�UP MENU <LOAD> 2 NO FACTORY USER (ALL) USER (NOT SYSTEM)
4
Press the MENU-UP button or MENU-DOWN button to move the cursor to the SAVE position, and press the SET button. The unit is set to the SAVE mode, and the SAVE screen appears on the video monitor. SET�UP MENU <SAVE> 2 NO USER (ALL) USER (NOT SYSTEM)
5 4
Press the MENU-UP button or MENU-DOWN button to move the cursor to the FACTORY position, and press the SET button. O When the cursor is moved to FACTORY and this operation is performed, all the settings except the SYSTEM menu settings are returned to the factory settings. O When the cursor is moved to NO and this operation is performed, the display returns to the menu screen without restoring the factory settings. Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position. This completes the menu setting procedure.
Press the MENU-UP button or MENU-DOWN button to move the cursor to the USER (ALL) position, and press the SET button. O When the cursor is moved to USER (NOT SYSTEM) and this operation is performed, all the settings except the SYSTEM menu settings are updated. O When the cursor is moved to NO and this operation is performed, the display returns to the menu screen without updating the settings. The screen prompting the user to confirm whether the settings are to be saved now appears. To save the settings, press the MENU-UP button or MENU-DOWN button to move the cursor to the YES position, and press the SET button. The settings are now stored in the memory. SAVE OK?
2
6
5
Setting the user defaults
1 2 3
Set the LOCAL/MENU/REMOTE switch to the MENU position. The unit is set to the menu setting mode, and the menu screen appears on the video monitor. Perform the operations in steps 2 to 6 for �Setting method using the on-screen menus,� and change to the desired settings.
NO YES
7
Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position. This completes the menu setting procedure.
Press the RESET button. The unit is now set to the default setting mode, and the default setting screen now appears on the video monitor. SELECT MODE 2 0 ESCAPE 1 LOAD 2 SAVE 3 PROTECT 25
|
|
|
> |
|
