Setup menus
OPERATION
Item Superimposed No. 161 display CTL BGN or TC BGN END No. Setting Superimposed display For setting the BEGIN point in the repeat playback mode. Either TC or CTL is set as the counter display mode using the COUNTER button. If no mode is set, � � : � � : � � : � � appears, and the tape start serves as the BEGIN point. For setting the END point in the repeat playback mode. Either TC or CTL is set as the counter display mode using the COUNTER button. If no mode is set, � � : � � : � � : � � appears, and the tape end serves as the END point. For setting what images are to be output while the tape returns to the BEGIN point in the repeat playback mode. FREEZE 0: The tape returns to the BEGIN point with the image played back at the END point still frozen. BLACK 1: The tape returns to the BEGIN point while the screen remains black. SW 2: The tape returns to the BEGIN point following the setting selected by the TAPE/EE switch. <Note> If the tape end is set as the END point when �0:FREEZE� is selected, the playback image will not be frozen properly. Set the END point to a place within the range where images are recorded. For setting the type of battery. 0: 12 V-type battery 1: 13 V-type battery 2: 14 V-type battery 3: Setting for using the BP-L90A lithium-ion battery. 4: Setting for using the ENDURA80 lithium-ion battery. 5: Setting for using the battery selected by the menu item No.181 [TYPE-A NEAR] item and No.182 [TYPE-A END] item TYPE-B 6: Setting for using the battery selected by the menu item No.183 [TYPE-B NEAR] item and No.184 [TYPE-B END] item NiCd12 NiCd13 NiCd14 S-LION I-LION TYPE-A 10.6 For setting (in increments of 0.1 V) the voltage level at which the counter flashes as : warning for TYPE-A battery (selected as the menu item No.180 [BATTERY SEL] 15.0 item). <Note> When this item has been set to a voltage level close to 15.0 V, the counter display may flash even when an AC power source is being used. 10.6 For setting (in increments of 0.1 V) the voltage level at which the TYPE-A battery : (selected as the menu item No.180 [BATTERY SEL] item) is to be automatically 14.0 turned off. 10.6 For setting (in increments of 0.1 V) the voltage level at which the counter flashes as : warning for TYPE-B battery (selected as the menu item No.180 [BATTERY SEL] 15.0 item). <Note> When this item has been set to a voltage level close to 15.0 V, the counter display may flash even when an AC power source is being used. 10.6 For setting (in increments of 0.1 V) the voltage level at which the TYPE-B battery : (selected as the menu item No.180 [BATTERY SEL] item) is to be automatically 14.0 turned off. Description of settings
