SHARP AJ6000
Manual de Servicio

<8> U separation arm
1) Remove the scanner unit. 2) Remove the cabinet unit. 3) Remove the main chassis unit. 4) Remove the U roller unit. 5) Remove the feed roller unit. 6) Remove the eject roller unit. 7) Remove the E clutch unit. 8) Remove the U rotating plate. 9) Remove the U rotating plate arm. 10) Remove the U separation guide. 11) Remove pawl A, and remove the U separation arm.

12) Remove the U return arm.

GRE

GRE

A

<10> Y motor pump
1) Remove the scanner unit. 2) Remove the cabinet unit. 3) Remove the main chassis unit. 4) Remove the U roller unit. 5) Remove the feed roller unit. 6) Remove the eject roller unit. 7) Remove the E clutch unit. 8) Remove the screw. 9) Remove the Y plate. 10) Remove the nut. 11) Remove the tube. 12) Remove the Y motor pump.

<9> U stopper, U return arm
1) 2) 3) 4) 5) Remove the scanner unit. Remove the cabinet unit. Remove the main chassis unit. Remove the U roller unit. Remove the feed roller unit.

1

3 2 1

4 5

6) Remove the eject roller unit. 7) Remove the E clutch unit. 8) Remove the U rotating plate. 9) Remove the U rotating plate arm. 10) Remove the U separation guide. 11) Remove the U stopper.

<11> Y gear
1) Remove the scanner unit. 2) Remove the cabinet unit. 3) Remove the Y gear.

GRE

GRE
[Note for assembly] Apply grease to the GRE section.

GRE

[Note for assembly] Apply grease to the GRE section.