PANASONIC AG-LW720GB
Manual de Usuario

Mounting the lens
Wide conversion lens
Model AGG

1Remove the lens cap from the camera. 2Loosen the screw on the side of the lens hood, then remove the lens hood from the camera.

Operating instructions
ENGLISH

This product is a conversion lens that is capable of shooting wider images than with usual lenses even in shallow space.

Screw

3Remove the front and rear caps from the conversion lens.

With a standard lens

With a wide conversion lens

CAUTION:
Do not point the lens directly at the sun or any other strong source of light! The condensing action of the lens may cause highly combustible objects nearby to catch on fire and cause greater damage. This may also result in loss of sight. Therefore, always attach the accessory cap to avoid direct contact with the rays of the sun. Do not place the lens on an unstable surface! It may fall off unexpectedly and possibly cause injury. It may also cause malfunctioning.

4Attach the conversion lens to the camera by turning it in the direction of arrow A.

A

Compatible cameras
AG-DVX100P, AG-DVX100E, AG-DVC180MC

Accessories
Lens caps (front: VGQ7484, rear: VGQ7486), Soft lens pouch (VFC4018)

Precautions for use
OWhen shooting with this lens attached, do not use the image stabilizing system (OIS) function or the auto focus (AF) function. OWhen using a zoom position setting in the wide angle (W) range with this lens attached, the 4 corners of the screen may become dark (eclipse). If this does happen, move the zoom position to one within the tele (T) range. ODepending on whether this lens is attached or not, the focus control information display value shown on the camera may differ, even if the distance from the subject is the same. ODo not touch the lens surface or allow it to get dirty. If, however, the lens does become dirty, clean off the dust using an airbrush or similar device, then wipe the lens using a dry, soft cloth. OWhen performing maintenance do not use benzine, thinners or other solvents. Doing so may cause discoloration or other damage. OWhen not in use, store the lens in a location with a low level of humidity, in the lens pouch with both the rear and front caps attached.

Specifications
Lens mount diameter: 2 7/8 inches (72 mm) Magnification: 0.8a Dimensions: Maximum diameter: 3 7/8 inches (97 mm) Total length: 1 7/8 inches (47 mm) Weight: Approx. 1.1 lb (500 g)

VQT0E72