TEAC AG-790
Manual de Servicio

1 SPECIFICATIONS
Amplifier Section
Output Power....100 + 100 watts RMS (0.9 % THD, 1 kHz, 8 ohms) Total Harmonic Distortion.................... 0.05 % (at 70 watts,1 kHz) Input Sensitivity/Impedance .................. PHONO: 5 mV/22 kohms LINE: 300 mV/22 kohms Frequency Response ...................... PHONO: 20 Hz�20 kHz, ±3 dB LINE: 20 Hz�50 kHz, +1/�3 dB Signal-to-Noise Ratio ................................ PHONO: 80 dB (IHF-A) LINE: 80 dB (IHF-A) Tone Control ............................................ BASS: ±10 dB at 100 Hz TREBLE: ±10 dB at 10 kHz Loudness Control (Volume at �40 dB Position) .............................. +9 dB at 100 Hz, +8 dB at 10 kHz

Voltage Conversion
(General export models only)

FM Tuner Section
(Without notes 98.1 MHz, 65 dBf) Tuning Range .................... 87.5 MHz�108.0 MHz (100 kHz steps) Usable Sensitivity (IHF) ............................................ Mono: 20 dBf 50 dB Quieting Sensitivity................ Mono: 39 dBf, Stereo: 46 dBf Capture Ratio ...................................................................... 2.8 dB Image Rejection Ratio .......................................................... 20 dB AM Suppresion Ratio............................................................ 48 dB Harmonic Distortion (1 kHz) .............. Mono: 0.4 %, Stereo: 0.5 % Frequency Response................................ 30 Hz�15 kHz, +2/�3 dB Stereo Separation (1 kHz) .................................................... 35 dB Signal-to-Noise Ratio ........................ Mono: 57 dB, Stereo: 55 dB Be sure to remove the power cord from the AC outlet before repositioning the voltage converter switch. 1. Locate the voltage selector on the rear panel. 2. Using a flat-bladed screwdriver, set to the appropriate 230V or 120V position according to your area. IN NORTH AMERICA USE ONLY ON 120 V SUPPLY.

AM Tuner Section
Tuning Range .......................... 530 kHz�1,720 kHz (10 kHz steps) Usable Sensitivity ............................................................ 55 dB/m Total Harmonic Distortion .................................... 1 % at 85 dB/m Signal-to-Noise Ratio ........................................ 48 dB at 85 dB/m

General
Power Requirements.................................. 120 V/230 V, 50-60 Hz Power Consumption ............................................................ 180 W AC Outlets ................ Unswitched x 2, Total 100 W max (1 A max) Dimensions (W x H x D)................................ 435 x 139 x 335 mm (17-1/8" x 5-1/2" x 13-3/16") Weight (net) ................................................ 9.4 kg (20-11/16 lbs) Standard Accessories .................................. AM Loop Antenna x 1 FM �T� Type Antenna x 1 Remote Control Unit x 1

� Design and specifications are subject to change without notice.

�2�