RICOH AFICIO COLOR 4106
Manual de Servicio

FILM PROJECTOR UNIT (A846)

24 February, 1999

[I]

[A] [D] [B] [E]

[C]

[F]

[H]

[G]
A846I503.WMF

9. Set the film strip holder [A] into the film projector unit at the base film setting position. NOTE: Push the film strip holder lightly to confirm that the film strip holder is set correctly. 10. Turn on the test switch [B] on the projector control board and turn on the projector unit main switch [C].

øCAUTION
The lamp housing and reflector [D] will become very hot. The lamp cooling fan [E] will start turning suddenly when the lamp housing temperature becomes high. Keep hands away from these components to avoid any injury. 11. Loosen the wing nut [F]. 12. Adjust the position of the projected light by turning the dial [G] with a hexagon wrench [H] until it is at the center of the 4" x 5" frame [I] which is reflected in the mirror unit. 13. Tighten the wing nut [F]. 14. Turn off the projector main switch and the test switch. 15. Reinstall the lamp cover and other covers.
3-52