Installing the main unit bracket /
Connecting leads
1 Remove the 2 screws from the main unit.
� Keep the screw.
Mounting the main unit on the wall /
Fixing screws temporarily
Adhere the supplied paper pattern at an appropriate position and fix temporarily with 2 screws (commercially available).
� Leave the screw heads 5 mm (1/4�) above the wall to hang the wall bracket. � Remove the pattern paper after fixing with the screws.
2 Remove the side cover, connect the cables and attach the side cover.
Place the main unit on a cushion or soft cloth to avoid damage.
1
Main unit bracket
1
Adhesive tape
35-45 mm (1-3/8" - 1-3/4")
5-6 mm (1/4")
5 mm (1/4")
Screw Side cover
Pattern paper Screw (commercially available)
Attach the main unit bracket to the main unit
Secure them with the supplied 2 screws.
� Use only the supplied screws to prevent the main unit from falling.
Mounting the wall bracket
1 Hang the wall bracket on the screws and tighten them. 2 Make sure all four holes are screwed.
Main unit bracket
2 2
Supplied screw (3 mm in diameter x 12 mm) (3/32� x 1/2�)
Tighten the screws securely.
Wall bracket
1
2
Screw (commercially available) Wall bracket
Caution
Make sure the main unit is in the �Position A�. If mounted in the �Position B�, it may fall from the wall.
Maintenance
Use a soft cloth to wipe off dirt. If the dirt is persistent, use a water dampened cloth and finish with a dry cloth. Do not use benzine or thinner. Deformation or discoloration may result.
Specifications
Load capacity : 5 kg (11.0 lbs.) or less Maximum dimensions : 228 mm (W) x 155 mm (H) x 162 mm (D) (9� (W) x 6-1/8� (H) x 6-3/8� (D) ) Weight : Approx. 1.5 kg (3.3 lbs.)
1 Hang the main unit bracket on the hooks of the wall bracket. 2 Secure them with the supplied 2 screws.
� The 2 screws should be tightened to prevent the main unit from falling. � Make sure speaker leads, etc. are properly connected.
3
Hook
Wall bracket
Main unit bracket Supplied screw (4 mm in diameter x 8 mm) (1/8� x 3/8�)
