The louvers in the top of the front panel allow you to control the direction of the cooled air. Use the tabs to direct the air up, down, right, left, or straight ahead.
Saving
l
energy
Ventilate your attic. High temperatures in the attic add to the air conditioner�s cooling load. . Try not to use heat-producing appliances during the hottest part of the day. l Keep heat registers and cool-air returns closed. Use exhaust vent fans while cooking, doing laundry, or l bathing.
l
Along with using the POWER SAVER MODE, there are many things you can do to help save energy. Improve your home�s insulation. Seal doors and windows. Close fireplace flue. Close blinds or drapes on the sunny side of your house. Add awnings. Make sure drapes or furniture do not block airflow from your air conditioner. Turn lights and appliances off when they are not needed.
l
l
l
Using
the Filter
Monitor
IMPORTANT: The MODE Control must be set to HIGH COOL for the Filter Monitor to work. If the MODE Control is set to a lower fan speed, turn the setting to HIGH COOL to check the filter. Then return the MODE Control to your desired setting.
The Filter Monitor tells you when the filter needs to be cleaned. When the amount of dirt on the filter reaches a level that FILTER would affect cooling perfomance, a MONITOR red flag appears under the words �FILTER MONITOR� on the control panel.
0
Normal
operating
sounds
When your air conditioner is operating normally, you may hear sounds such as: l Droplets of water hitting the condenser, causing a l Clicks from the thermostat cycle. �pinging� or �clicking� sound. The water droplets l Vibrations or noise due to poor wall or window help cool the condenser. construction. l Air movement from the fan. l A high-pitched hum or pulsating noise caused by the modern high-efficiency compressor cycling on and off.
