WHIRLPOOL ACB6260AW
Manual de Usuario

Using the Oven Control (cont�d)
Delayed Self-clean Cycle
Self-clean feature uses high oven temperature to clean oven interior. Set oven to begin and end cleaning at later time. Oven control calculates start time automatically. Only one oven can be set for a delayed or timed cooking or clean cycle. The other oven can be used for a standard cooking cycle. 1. Prepare oven for self-cleaning (see below right). 2. Close door. 3. Press CLEAN pad. � CLEAN TIME flashes in display. � Pressing any number pad will make the default cycle length of 3 hours display. � Clean cycle can be set from two to four hours; can be changed by using digit pads. 4. Press STOP TIME pad. 5. Set stop time for the cleaning cycle. � Default time is current time of day plus selected clean cycle length. � Stop time can be set from current time to current time plus 11 hours and 55 minutes. � Self-clean cycle is set. � DELAY, CLEAN and TIMED and current time of day display while oven is in delay mode. � Oven being cleaned cannot be used until completion of the selfclean cycle. � CLEAN, LOCK, ON graphics display when self-clean cycle begins. A cooling fan turns on and oven door locks. � Oven light will not operate during a self-clean cycle. � At the end of the self-clean cycle no signal sounds. � ON no longer displays and oven shuts off. � LOCK and cooling fan will remain on until oven reaches a cooler temperature. � LOCK will shut off when door has unlocked. Oven cavity will be hot to the touch. DO NOT attempt to open door prior to LOCK shutting off. To avoid risk of personal injury, do not touch oven door, oven

! WARNING

vents, or area around vents, during self-cleaning. These areas can become hot enough to cause burns.

! CAUTION
To avoid fire or smoke damage, � remove any flammable materials from storage drawer. Items like plastic containers and paper manuals can melt or burn. � clean excess spills before starting a self-clean cycle.

Do I need to prepare?
To get the best results from the self-clean cycle, follow these steps: � � Clean excess spills from oven interior and bottom. Remove birds or animals

susceptible to smoke or other fumes from the room or adjoining room. Open window if possible. Make sure oven light cover is properly in place. Do not use cleaning cycle if it is not. Remove oven racks, pans and all cooking utensils from oven.

Interrupting the self-clean cycle
To stop a self-clean cycle that has already started follow these steps. If the interruption occurs mid cycle, the oven will remain locked, even though the cycle has stopped, until the oven cavity has cooled to a lower temperature. 1. Press OVEN CANCEL pad. 2. When oven has cooled to a lower temperature, LOCKED light shuts off. Door can be opened. Oven cavity will be hot to the touch. DO NOT force door. This can cause damage to the latch. � �

�

13