MITAC 8889
Manual de Servicio

8889 N/B Maintenance
2.2.9 LCD Panel
Disassembly 1. Remove the battery, keyboard, CPU, hard disk drive, CD/DVD-ROM drive, wireless card, DDR and LCD assembly. (Refer to section 2.2.1, 2.2.2, 2.2.3, 2.2.4, 2.2.5, 2.2.6, 2.2.7 and 2.2.8 Disassembly) 2. Remove the two rubber pads and two screws on the corners of the panel. (Figure 2-21) 3. Insert a flat screwdriver to the lower part of the LCD cover and gently pry the frame out. Repeat the process until the cover is completely separated from the housing. 4. Remove the six screws and disconnect the cable. (Figure 2-22)

Figure 2-21 Remove LCD cover

Figure 2-22 Remove the six screws and disconnect the cable

62