CONVENTIONAL COOKTOP
IGNITION SYSTEM
Your cooktop is equipped with either pilot ignition (using a pilot flame to light the burner) or pilotless ignition (using a sparkfromanignitortolighttheburner),
PILOT IGNITION
When the cooktop is first installed, the pilots may bedifficult to lightdue to air in the gas line. To bleed off air from the line, hold a lighted match next to the burner and turn knob on. When the burner lights, turn the knob off and proeeed as directed below. To light pilot: Remove or raise and support cooktop on metal rod, if equipped. Hold lighted match near the pilot ports.
Besure all surfacecontrolsare set in the OFF position prior to supplying gas to the appliance.
TO OPERATE SURFACE BURNER WITH PILOTLESS IGNITION DURING A POWER FAILURE:
2. Hold a lighted match to the desired surface burner head. 3. Turn knob to LITE. The burner will then light. 4. Adjust the flame to the desired level. _ _ 1. Besureallcontrols are intheeFF position.
