Set the Pattern Length and Input Quantize value. For more information on Input Quantize see page 55. Set the number of count-in bars if you wish. Select a Track number. The default value is Track one. This is �ne for the �rst track. Press the Preset View button. The preset screen shown below appears.
C01A V127 P00 A:P 0503 kit:80�s Tones
8. 9.
User
Select a Preset for your �rst track. Press the Preset View button again after you�ve selected a preset. The LED will go out and you�ll be returned to the Pattern screen.
You can go in and out of Record mode at any time by pressing the Record button
O
Get ready to record the �rst track! 10. Press Play to begin recording. Recording will begin after the count-in period (if any). The pattern will loop when it reaches the end of its length.
11.
Press Stop when you�re �nished recording.
Are you happy with your performance? If not, you can erase the track and try again.
To Erase an Entire Pattern: Copy an �Empty Sequence� over the pattern. (Save/Copy menu).
O
To Erase the Track:
12. 13. 14. 15.
Press the Pattern Edit button and turn the data entry control until you �nd the �Cut Track to Clipboard� screen. Move the cursor to the lower line of the display under Track 1. Press the �ashing Enter button to erase the track. Press the Pattern Edit button again to exit the menu, then go back to step 10 and re-record the track.
To Erase Speci�c Notes:
16.
Press the Erase button in Realtime Record mode and hold down the keyboard note you wish to erase. The note will be erased when it comes around in the pattern.
To Record another Track:
17. 18. 19.
Press the +Track button located to the left of the LCD. The track number increments to Track 02. Press the Preset View button. Notice that the MIDI channel has also incremented to C02A. Select a preset. Press the Preset View button again after you�ve selected a preset. You�ll be returned to the Pattern screen.
