Removing
Pull out to the stop, lift the front nd pull again.
the crispers
To remove the crispers: 1. Slide crisper straight out to the stop, lift front, then slide out the rest of the way. 2. Replace in reverse order.
Removing
Remove the glass insert,
the crisper crisper
cover
To remove I /
cover:
lift the frame front, then the back.
1. Push up glass insert from the bottom, then slide out with both hands. 2. Lift front of cover frame and remove cover support. 3. Lift out cover frame by pulling up and out. To replace crisper cover: 1. Fit back of cover into notch supports on walls of refrigerator, then lower front into place. 2. Insert cover support (with the long tab toward the front) into the groove on the underside of the crisper cover. NOTE: If support needs adjustment, turn base clockwise to raise, or counter-clockwise to lower. 3. Slide back of glass insert into place, then lower front.
