To remove the meat drawer: . Slide the meat drawer out to the stop. I . Lift the front. :�. Slide meat drawer out the rest of the way. 2.�. Replace in reverse order. To remove the cover: .�. Remove crisper, crisper cover and meat drawer. ; . Tilt front of cover up, lift at back and pull straight out. :1. Replace in reverse order.
Adjusting
the meat
drawer
temperature
Cold air flows against the meat drawer through an opening between the freezer and the refrigerator. This helps keep the meat drawer colder than the rest of the refrigerator for better storage of meats. Slide the control to let more or less cold air through.
Removing
To 1. 2. 3.
the freezer
bin
For proper air movement, keep the freezer bin in place when the refrigerator is operating. remove the bin: Slide bin out to the stop. Lift bin at the front to clear the stop. Slide bin out the rest of the way.
To replace the bin: 1. Place bin on the slides. 2. Make sure the stops clear the front of the slides. 3. Slide bin in.
Using
the
ice cube
trays
If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get. To remove ice: 1. Hold tray at both ends. 2. Twist slightly.