Press the Razor Head Release Button and remove Razor Head Assembly from the razor unit.
C
3 4
Brush the inside of the razor housing and Razor Head Assembly. Turn Razor Head Assembly over so that underside is exposed. Turn wheel of frame counterclockwise. Remove the frame and brush clean.
C C
5 6 7
Remove and clean one cutter and comb at a time. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs it could take several weeks before optimal shaving performance is restored. 8 Separate the cutter from the comb. Only brush the cutter in an upward motion. Use the short bristled side of the brush.
C C
9
10 Brush the slots of the comb. For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid
