FUNAI 6727FRE
Manual de Servicio

Reference Notes in the Table
Caution ! When removing the CRT, be sure to discharge the Anode Lead of the CRT with the CRT Ground Wire before removing the Anode Cap. CAUTION 1: Discharge the Anode Lead of the CRT with the CRT Ground Wire before removing the Anode Cap.

1. Disconnect the following: Anode Cap, CN501A, CRT CBA, CN571, CN602, CN702, and CN1501. Then remove Tray Chassis Unit. 2. Remove three screws (S-15) and remove the Top Shield. Remove screws 7(S-16), (S-17) and (S-18). Then, desolder connectors (CN201, CN202, CN203, CN204) and lift up the Deck Assembly.

(S-1) (S-1) (S-1)

(S-2) (S-1) (S-2) (S-1)

(S-1)

[1] Rear Cabinet
Fig. 1

(S-3)

Anode Cap CRT CBA

(S-3)

(S-3)

[3] CRT

(S-3)

Fig. 2

1-6-2

T2021DC