FUNAI 6626LDG
Manual de Servicio

HOW TO INITIALIZE THE LCD TV/DVD
To put the program back at the factory-default, initialize the LCD TV/DVD as the following procedure.

< DVD Section >
1. Press [1], [2], [3], [4], and [DISPLAY] buttons on the remote control unit in that order. Fig. g appears on the screen.
"*******" differs depending on the models.

< LCD TV Section >
1. Turn the power on. (Use main power on the TV unit.) 2. To enter the service mode, press [SLEEP] button on the service remote control unit. - To cancel the service mode, press [POWER] button on the remote control. 3. To initialize the LCD television, press [DISPLAY] button on the remote control unit. - �INITIALIZED� (red) appears on the screen. - After few seconds (completion initialization), the screen is reset.

MODEL : ******* Version : *.** Region : *

EEPROM CLEAR : CLEAR

EXIT: SELECT

Fig. g

2. Press [CLEAR] button on the remote control unit. Fig. h appears on the screen.
"*******" differs depending on the models.

MODEL : ******* Version : *.** Region : * EEPROM CLEAR : OK

EEPROM CLEAR : CLEAR

EXIT: SELECT

Fig. h

When �OK� appears on the screen, the factory default will be set. 3. To exit this mode, press [CH. o / p] or [SELECT] button to go to TV mode, or press [POWER] button to turn the power off.

7-1

L4350INT