|
|
|
Usuarios conectados
Actualmente hay 5674 visitantes y
1 usuarios online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Customizing Your Monitor
Getting Started Customizing Your Monitor 3
Press the ./> buttons to select the color temperature.
Using the COLOR Display
On-screen
Using the CONVERGENCE screen Display
On-
4
Press the ?// buttons to adjust the settings.
You can change the monitor�s color temperature. For example, you can adjust or change the colors of a picture on the screen to match the actual colors of a printed picture. Once the setting is adjusted, it will be stored in memory for all input signals received.
There are two color temperature modes in the OSD. The preset adjustments are 9,300K and 5,000K. Selecting your own color temperature between 9,300K and 5,000K Press the ./> buttons to select � (Variable)� and adjust by pressing the ?// buttons.
COLOR
9 3 0 0K 5 0 0 0K
The CONVERGENCE settings allow you to adjust the quality of the picture by controlling the convergence. The convergence refers to the alignment of the red, green, and blue color signals. If you see red or blue shadows around letters or lines, adjust the convergence. Once the setting is adjusted, it will be stored in memory for all input signals received.
For
Press
/ . . . to shift red shadows to the right and blue shadows to the left ? . . . to shift red shadows to the left and blue shadows to the right / . . . to shift red shadows up and blue shadows down ? . . . to shift red shadows down and blue shadows up
(Horizontal Convergence)
1
Press the button. The MENU OSD appears.
1
Press the button. The MENU OSD appears.
(Vertical Convergence)
2
Press the ./> buttons to select � the button again. The COLOR OSD appears.
COLOR� and press
26
Press the
button once to return to the MENU OSD, and
2
COLOR
9 3 0 0K 5 0 0 0K
Press the ./> buttons to select � and press the button again. The CONVERGENCE OSD appears.
CONVERGENCE�
twice to return to normal viewing. If no buttons are pressed, the OSD closes automatically after about 30 seconds. To reset, press the ? (reset) button while the OSD is on. The selected item is reset to the factory setting.
/ . . . for a higher temperature (bluish) ? . . . for a lower temperature (reddish) Press the button once to return to the MENU OSD, and
EN F
CONVERGENCE
twice to return to normal viewing. If no buttons are pressed, the OSD closes automatically after about 30 seconds.
26
ES
1-4
To reset, press the ? (reset) button while the OSD is on. The selected color temperature is reset to the factory settings.
3
Press the ./> buttons to select the item you want to adjust.
C
Select
To
adjust the horizontal convergence
(Horizontal Convergence) adjust the vertical convergence (Vertical Convergence)
8
9
|
|
|
> |
|
