SHARP 64LHP4000
Manual de Servicio

64LHP4000

VCR CONTROL BUTTONS
If the VCR is preset by OPERATION OF REMOTE CONTROL (page 53), the remote control unit button will function as follows when the mode switch of the remote control unit is set to VCR. When the input button having the same number as the input terminal connecting the VCR is pressed, the VCR can be operated using buttons 1 to 9. VCR which are made by other makers and are not preset can also be operated using the remote control unit if buttons 1 to 9 have learned the functions. 1 Numeric buttons Use to enter two-digit code numbers when identifying your VCR. 2 \\ REW Press to rewind a tape. For some VCRs you may need to press STOP first, then REWIND. In Playback mode, hold button down to view picture moving rapidly in reverse. 3 | PLAY Press to play back a tape.

1

4 â PAUSE Press to temporarily stop the tape during playback or recording. Press again to release Pause. 5 s STOP Press to stop the tape. 6 � REC Press to begin recording.

23 4 5 6

7 8 9

7 FF || Press to rapidly advance the tape. For some VCRs, you may need to press STOP first, then FF. In Playback mode, hold button down to view the picture moving rapidly in forward direction. 8 VCR CHANNEL UP (')/ DOWN (") Press to scan up or down through the channels on the VCR. 9 VCR POWER Press to turn the VCR on and off.

9