FUNAI 6260VE
Manual de Servicio

9. Recording Features
Timer Recording
�Insert a tape with its record tab into the VCR.

Hint for Timer Recording

1
MENU

-MENUB TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT

5

Select the desired start time (hour)
STOP
PLAY

9
STOP
PLAY

ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME 0 7 : 3 0 PM END TIME 0 8 : 3 0 PM CHANNEL 16 REC SPEED SP B SP SLP

ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON

or

or
F.FWD

START TIME 0 7 : 3 0 � � END TIME � � : � � � � CHANNEL �� REC SPEED � �

F.FWD

Select the desired recording speed
C.RESET EXIT

� If there is a power failure or the VCR has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. � If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape and the VCR power will be turned off. The TIMER indicator will flash. � If a tape is not in the VCR or does not have the record tab, the TIMER indicator flashes and timer recording cannot be performed. Please insert a recordable tape. � When all the Timer Recording are completed, the TIMER indicator flashes. To play or eject the recorded tape, press the POWER button first, and then press the PLAY or EJECT button.

Select the minute

To cancel a Timer Recording that is in progress Press the STOP/EJECT button on the VCR.
POWER

2 2
STOP
PLAY

PROGRAM NUMBER 4 DATE START TIME END TIME CHANNEL REC SPEED � � � � � �/�� �:�� �� �:�� �� � �

STOP

PLAY

or

10 Turn off the VCR
for recording
F.FWD

Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. (Back of TV)
(Back of Playing VCR) (Back of Recording VCR*)

or

� TIMER indicator on the VCR lights up.

Select an empty program number
F.FWD

Hint 6
STOP
PLAY

ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME END TIME CHANNEL REC SPEED 0 � � � 7 : 3 0 PM �:�� �� � � AM B PM

� To go back one step, press the REW button (during the steps [3] to [9].)
OUT OUT IN AUDIO

1
IN VIDEO

2
AUDIO OUT IN VIDEO ANT IN OUT

Connect
RF Cable

or

To Check, Correct, or Cancel a Timer Program
1) Turn the power on by pressing the POWER button. 2) Select main menu by pressing the MENU button. 3) Select "TIMER PROGRAMMING" by pressing the PLAY or STOP button. Then, press the F.FWD button. 4) Select the program number which you want to check by pressing the PLAY or STOP button. The details of the program you selected will appear on the TV screen. � Go to the digit you want to change by pressing the F.FWD or REW button. Then, enter correct numbers by pressing the PLAY or STOP button. � You may cancel the entire program by pressing the REW button while the program number flashes. 5) Press the C.RESET/EXIT button to exit. 6) Press the POWER button to return to timer stand-by mode.

Connect

3
STO P
PLAY

PROGRAM NUMBER 4 B ONCE DAILY WEEKLY

Select �AM� or �PM�
F.FWD

Audio/Video Cables
(not supplied)

*Front input jacks are also available

(supplied)

or

1) Insert a pre-recorded tape into the playing VCR. 2) Insert a tape with its record tab into the recording VCR. 3) Press the SPEED button on the remote control of the recording VCR to select the desired recording speed (SP/SLP). 4) Select the �L1� or �L2�position on the recording VCR. � To use the input jacks on the back of the VCR, select "L1" position by pressing [0], [0], [1] on the remote control or the CHANNEL buttons. � To use the input jacks on the front of the VCR, select "L2" position by pressing [0], [0], [2] on the remote control or the CHANNEL buttons. 5) Press the REC/OTR button on the recording VCR. 6) Begin playback of the tape in the playing VCR. 7) To stop recording, press the STOP/EJECT button on the recording VCR, then stop playback of the tape in the playing VCR.

Select �ONCE�, �DAILY� (Mon-Fri), or �WEEKLY�
F.FWD

7

Repeat the procedure in steps 5 and 6 to set the end time.
F.FWD

4

Select the desired month
STOP
PLAY

8
STOP
PLAY

ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME 0 7 : 3 0 PM END TIME 0 8 : 3 0 PM CHANNEL 16 REC SPEED � �

or

ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 0 5 / 0 3 MON START TIME � � : � � � � END TIME � � : � � � � �� CHANNEL

or

F.FWD

REC SPEED � �

Select the desired day
STOP
PLAY

or

� You can program one year in advance.
F.FWD

Select the desired channel � If you have connected the VCR to a cable box or satellite box as the Connection A on page 1, select the VCR to channel 3 or 4 (the RF output channel of the VCR). Then, select the desired channel at the cable box or satellite box. Leave the cable box or satellite box on for timer recording.
F.FWD

Hint
� For best results during dubbing, use the VCR�s front panel controls whenever possible. The remote control might affect the playing VCR�s operation. � Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended. � You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs in place of the playing VCR. � �L1� or �L2� is found before the lowest memorized channel. (Example: CH02)

-6-

EN