ZOOM 607_BASS
Manual de Usuario

Selecting Patches for Play
To try out the 607, we recommend that you simply play your instrument while switching patches. This will let you quickly see what the 607 can do.

Selecting Patches for Play

To directly switch the bank
You can use the VALUE [+] / [-] keys to directly switch among the banks A - G.

Power-on
When using the 607 on batteries, plug a shielded cable with mono phone plug into the INPUT jack of the 607.
Selecting Patches for Play

When using the 607 with the AC adapter, plug the adapter into the outlet and plug the cable from the adapter into the DC 9V jack on the 607. Turn power to the bass amplifier on, and adjust the volume to a suitable level.

To adjust the master volume
Keep both VALUE [+] / [-] keys depressed for more than 1 second.

Selecting Patches for Play

While the master volume setting is shown, pressing the VALUE [+] / [-] key changes the setting.
The setting range is 0 - 50. When the unit is turned off and on again, the setting will be reset to 40.
When using headphones, the master volume setting can be used to adjust the listening volume.

Set 607 to play mode
When the [PLAY/EDIT] selector is set to a different position, set it to "PLAY". The currently selected bank and patch number are shown on the display.
Immediately after turning on power to the 607, the unit will be in play mode even if the [PLAY/EDIT] selector is set to a different position.

Switch patches
To switch patches in play mode, use the [W]/[ Q ] foot switches.
ZOOM 607
BASS

Bank

Patch number

8

ZOOM 607

BASS

9