TOSHIBA 57HLX82
Manual de Servicio

How to replace the lamp unit (cont.) 5. Grasp the lamp unit handle and gently pull the lamp unit straight out of the TV. Set the old lamp unit aside (see "Lamp unit disposal" on page 62).

6. Carefully insert the new lamp unit straight into the TV until it is fully seated. The lamp unit is fully seated when the two plastic "nubs" on the TV cabinet are flush with the two holes in the lamp unit (above and below the lamp unit screw hole; see illustration below).

Note: � Never subject the lamp unit to excessive shock. � Never touch the lamp unit glass or otherwise get it dirty. Doing so may affect the image quality and reduce the service life of the lamp. See "Cleaning the lamp unit glass" at right. 7. Using a manual flathead screwdriver, replace the lamp unit screw. Note: Hand-tighten only. Do not use an electric screwdriver.

Cleaning the lamp unit glass If you accidentally touch the lamp unit glass or otherwise get it dirty, wipe it with a lintfree lens cleaning cloth (such as a cloth for cleaning camera lenses or eyeglasses). CAUTION: NEVER clean a hot lamp with any type of flammable liquid or aerosol cleaning agent. Many ordinary cleaning agents (such as glass cleaners) contain chemicals that may be flammable at certain temperatures. If the lamp unit is not allowed to cool for at least one (1) hour, such chemicals may ignite.

Lamp unit screw (hand-tighten only)

Note: Make sure the lamp unit and screw are installed securely; otherwise, the TV may not turn on and the lamp life may be shortened.

(Continued on next page)

� 13 �

SPECIFIC INFORMATIONS GENERAL ADJUSTMENTS

Fully seated lamp unit (two plastic "nubs" on TV cabinet are flush with two holes in lamp unit).