SHURE 515BSM
Manual de Usuario

Switch Built-in, leaf-type, non-locking, push-to-talk Shock Mount Internal rubber vibration isolator Cable Highly durable, retractable cable with effective hum shielding, four conductors (two shielded), neoprene jacketed with 5-pin connector Length: 330 mm (13 in.) retracted 1.83 m (6 ft) extended Case Silver finish die casting with black enamel diecast grille and stainless steel screen Dimensions See Figure 3

DIRECTION TO ACTUATE SWITCH

CASE GROUND

RED BLACK

CODED WIRE GREEN SHIELD GREEN CARTRIDGE WHITE GREEN

CONNECTOR PIN NUMBER P4 P5 P1 P3 P2

6.5 in. 16.5 cm

INTERNAL CONNECTIONS FIGURE 4 MOUNTING

1.5 in. 3.75 cm

0.85 in. 2 cm

OVERALL DIMENSIONS FIGURE 3

Certification Conforms to European Union directives, eligible to bear CE marking; meets European Union EMC Immunity Requirements (EN 50 082�1, 1992).
CONNECTIONS

For non-handheld use, mount the 515BSM to a fixed pipe with a 5/8 in.�27 thread, screw a Shure A25C swivel adapter to the pipe, then insert the microphone in the adapter. To mount the 515BSM to a wall or lectern, install a Shure A12B mounting flange, screw a Shure A25C swivel adapter to the mounting flange, then insert the microhpne in the adapter. Net Weight 515BSM . . . . . . . . . . . . . . . . . . . . . . . . . 380 g (13.5 oz)
FURNISHED ACCESSORY

These low-impedance microphones are designed for connection to microphone inputs rated at 75 to 300 ohms. Using balanced-line low-impedance cables permits very long cable lengths without affecting response or level. The GREEN and WHITE cable leads are the microphone conductors for balanced-line connections; the shield is connected to the amplifier ground. For unbalanced operation, connect the WHITE lead to the shield, and use the GREEN lead as the microphone conductor. The RED and BLACK cable leads are used to control an external relay or control circuit. Refer to the following tables and to the wiring diagram in Figure 4.
INPUT TYPE WIRE COLOR GREEN UNBALANCED WHITE SHIELD GREEN BALANCED WHITE SHIELD FUNCTION XLR CONNECTOR PIN 2 PIN 3 PIN 1 PIN 2 PIN 3 PIN 1

1.27 mm (.050 in.) Hex Wrench . . . . . . . . . . . . 80A67 Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A25C Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A12B
REPLACEMENT PARTS

Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R180 Grille Assembly . . . . . . . . . . . . . . . . . . . . . . . . RK334G Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90B4645 Windscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1WS For additional service or parts information, please contact Shure�s Service department at 1�800�516�2525. Outside the United States, please contact your authorized Shure Service Center.

AUDIO AUDIO GROUND CHASSIS GROUND AUDIO + AUDIO � CHASSIS GROUND

2