INSTALLATION
5 cm 5 cm 5 cm � Place your TV set on a solid base, strong enough to withstand the weight of the set. � Leave a space of at least 5 cm around each side of the TV set to allow for proper ventilation. � Do not place TV set near a radiator or other sources of heat. � Do not place TV set where it can be exposed to rain or excesssive moisture.
Positioning of the TV set
Connecting the Aerial
� Insert the aerial plug into the socket the set. at the rear of
Connecting to the mains
� Insert the mains plug into the wall socket. (For correct mains voltage, refer to the type sticker at the rear of the set.) Note : This diagram is not representative of the actual plug and socket.
Using the Remote Control
Battery Usage CAUTION - To prevent battery leakage which may result in bodily injury or damage to the remote: � Install ALL batteries correctly, + and - as marked on the remote control. � Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc.). � Remove batteries when the remote is not used for a long time.
Switching on the TV set
� Press the mains power button to switch on/off the TV set. � If the set is on standby mode (indicator light is red), press the Standby button on the remote control to switch on set.
