TOSHIBA 36ZP18Q
Manual de Servicio

DESIGN MODE
1. ENTERING TO DESIGN MODE 1) Select the Service mode. 2) While pressing o or CALL button on Remote and press MENU button on TV.
S D Press Press

3) Press MENU button on TV.

ITEM DATA

(Design mode)

(Adjustment mode)

When QA02 is initialized, items �OPT0� and �OPT1� of DESIGN MODE are set to the data of the representative model of this chassis family. Therefore, because ON-SCREEN specification remains in the state of the representative of model. This model is required to reset the data of items �OPT0� and �OPT1�.

Refer to table-3 for data of design mode. (See SETTING & ADJUSTING DATA on page 18) 3. ADJUSTING THE DATA Pressing of VOLUME s or t button will change the value of data.

�9�

SPECIFIC INFORMATIONS GENERAL ADJUSTMENTS

2. SELECTING THE ADJUSTING ITEMS Every pressing of CHANNEL t button in the design mode changes the adjustment items in the order of table-3. (s button for reverse order)