Installing your LCD TV
Positioning the television set Place your TV on a solid stable surface. To avoid danger do not expose the TV to water, or heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear.
Connecting the aerials � Use the aerial connection lead and connect the : socket situated at the bottom of the TV to your aerial socket. � Connect the power lead to the television and the mains plug into the wall socket (220-240 V 50/60 Hz). For connecting other appliances see page Quick Use Guide.
Switching on To switch on the set, press the POWER button. A green indicator comes on and the screen lights up. Go straight to the Quick Installation chapter. If the TV remains in standby mode (red indicator), press the P �/+ on the remote control. The indicator will flash when you use the remote control.
Remote Control
Pull out the plastic insulation sheet from the battery, this will activate the remote control. The battery supplied with the appliance does not contain mercury or nickel cadmium so as to protect the environment. Please do not discard your used batteries, but use the recycling methods available (consult your distributor).