HITACHI 32PD5300
Manual de Usuario

42 inch

4. Fasten the wall-mount unit securely to the wall. G Clamp to two or more of the long slotted holes in the upper and lower parts of each wall-mounting metal in a well-balanced manner.
cutout

5. Dressing the cables G When passing the plasma TV power cord and signal cables behind the plasma TV, use wire clamps, etc., to prevent cable damage.

Mount on a firm, solid surface. Wall-mount metal (top)

Wall-mount metal (bottom) Use the washers provided as necessary.

Wire clamps

Mounting the TV-mount metals on the plasma TV
1. Remove the stand. x Place a protective sheet cover on the top of a table and place the plasma TV on the cover with the back side upward. � Remove the 4 EMI ground screws. (for CL32-PD2100 only.) � Remove the 4 or 5 (CL37-PD2100) screws fastening the stand and remove the stand in the direction indicated by the arrow mark.
Remove the 4 screws Remove the 4 EMI ground screws.(CL32-PD2100)

2. Installing the TV-mount metals

CL32-PD2100

IFasten the two TV-mount metals to the back of the

plasma TV with 4 M6 x 18 screws.

4 M6 x 18 screws TV-mount metal

Plasma TV

The 3rd TV-mount metal hole

Remove the screws (CL37-PD2100)

Table Stand Protective sheet cover
The 4th TV-mount metal hole

�6�